|
|
|
|
Vinyl Lettering We will cut a vinyl decal in specific colors and Fonts for very reasonable prices. Here's some examples:
We can cut these types in different sizes and colors. You can specify the exact height and length that you want to fill an area. Our stock colors are Black, White, Bright Red, Bright Blue, Bright Yellow, Green. Shipping is $2.00 per order by USPS first class mail. Pick the vinyl letter shipping option at checkout. You can add a slant to the letters.
10% is very slight. 20% is what I usually use to most peoples satisfaction. We will cut 1 set of letters ranging between 2 and 3 inches high for
$4.00 up to 10 letters. Letters between 1/2 inch to 1.75 inches for $2.00 up to
12 letters. If
you want something different just email me at tbaffer@aol.com. Tom SR.
Applying the letters is easy. Apply to a clean smooth surface. The letters will have masking tape on top of them. When you peel the masking tape back, the letters will be stuck to the tape. Line up the tape with the letters on it and put in place. Apply pressure to the tape to get all the air out. Remove the masking tape and the vinyl letters will stay in place. The vinyl letters have a stronger adhesive that allows the masking tape to be removed without removing the letters. For larger numbers, you can reposition them by applying water with a few drops of dishwater detergent in it on the surface. The wet surface allows the numbers to slide around until you have them where you want. Use a squeegee or anything that could press out the water from under the vinyl letters. Remove the masking tape - if the letters start to come off with the tape then the surface is still wet. Allow the water to dry 20 - 30 minutes, the letters will then come off correctly. Pictured directions are included with each order.
|
Send mail to tbaffer@aol.com with questions or comments about this web site.
|
